Parastrip SA is a 13" wide modified bitumen cover strip used to help seal & waterproof the end laps on composite roofing panels.

Listings, Approvals & Certifications:

Meets or exceeds CSA A123.23

About Parastrip™ SA

Designed for use in a homogeneous multi-layer modified bitumen roof membrane system, Parastrip™ SA consists of a 180 gram polyester mat impregnated and coated with styrene-butadiene-styrene (SBS) modified bitumen. The top surface is covered with a mineral parting agent and the back surface is coated with a self-adhesive bitumen layer and is lined with a polyolefin release film. Contact Siplast for information on approved product uses.

Available in the US & Canada.
Contact your Siplast representative to request a sample.

Parastrip™ SA

Parastrip™ SA consists of a 180 gram polyester mat impregnated and coated with styrene-butadiene-styrene (SBS) modified bitumen. The top surface is covered with a mineral parting agent and the back surface is coated with a self-adhesive bitumen layer and is lined with a polyolefin release film.

Installation

Application

Read full application instructions at Siplast.com before using or installing this product.

Storage and Handling

All Siplast roll roofing products should be stored on end on a clean, flat surface. Rolls should not be dropped on ends or edges or stored in a leaning position. Deformation resulting from these actions will make proper installation difficult. All roofing products should be stored in a dry place out of direct exposure to the elements and should not be double stacked. Material should be handled so that it remains dry prior to and during installation.

See product packaging and the Safety Data Sheet for specific information on the safe handling of this product.