Flexible PMMA Resin

Featured Benefits

• Colors Available: Beige (#1013)
• Typical Set/Cure Times 68°F (20°C): Resists rainwater wash off in 30 minutes, ready for next coat in 30 minutes, pedestrian and vehicular trafficable in 2 hours
• Low VOC Content: < 25 g/L (catalyzed) EPA test method 24

Terapro Flashing Resin is a multi-component, fast curing, flexible PMMA resin for use in conjunction with Terapro Flashing Systems. Terapro Flashing Resin, when catalyzed, is combined with Pro Fleece to form a monolithic, reinforced flashing system for use in conjunction with Terapro and Terapro VTS Waterproofing Systems.
Contact Siplast for specific information on specified approved product uses.

Featured Benefits

• Colors Available: Pebble Gray (#7032) 
• Typical Set/Cure Times 68°F (20°C): Resists rainwater wash off in 30 minutes, ready for next coat in 45 minutes, pedestrian and vehicular trafficable in 2 hours
• Low VOC Content: < 25 g/L (catalyzed) EPA test method 24

Application

Refer to the applicable Siplast Installers Guide for detailed application information, including application/coverage rates. The product must be catalyzed before use using Pro Catalyst. See mixing charts that are supplied with Pro Catalyst products.

Storage and Handling

Store indoors in a well-ventilated, cool, dry area away from heat, open fire, ignition sources, direct sunlight, oxidizing agents, strong acids, and strong alkalis. Do not store below 32°F (0°C). Products may auto-polymerize at temperatures greater than 140°F (60°C). Store jobsite materials on pallets in a shaded, well-ventilated area. Cover unshaded areas with a reflective tarp that allows air circulation. Standard shelf life is 12 months; shelf life will be reduced when stored at temperatures above 77°F and below 32°F.

See product packaging and the Safety Data Sheet for specific information on the safe handling of this product.

Packaging

Packaging: 10 kg (22 lb) resealable metal drums
Units Per Pallet: 60