Fast-Curing PMMA Resin
Pro Color Finish is available in a variety of standard colors, which can be used alone or applied in patterns for dramatic effects or practical purposes such as designating private traffic control paths.
- Pro Color Finish can be used as an optional finish layer in Parapro Systems.
About Pro Color Finish Resin
Contact Siplast for specific information on specified approved product uses.
Featured Benefits
- Multiple Colors Available: contact Siplast for availability of a specific color
- Pot Life: 15 minutes at 68°F (20°C)
- Typical Set/Cure Times 68°F (20°C): Resists Rainwater Washoff in 30 minutes, ready for next coat in 45 minutes, pedestrian and vehicular trafficable in 2 hours
- Low VOC Content: < 25 g/L (catalyzed) EPA test method 24
Pro Color Finish Resin
-
Colors
Gray, Beige, White, Blue, Terracotta, Yellow
-
Unit
Drums
Installation
Storage and Handling
Store indoors in a well-ventilated, cool, dry area away from heat, open fire, ignition sources, direct sunlight, oxidizing agents, strong acids, and strong alkalis. Do not store below 32°F (0°C). The product may auto-polymerize at temperatures greater than 140°F (60°C). Store jobsite materials on pallets in a shaded, well-ventilated area. Cover unshaded areas with a reflective tarp that allows air circulation. Standard shelf life is 6 months; product life is reduced when stored at temperatures above 77°F (25°C).
See product packaging and the Safety Data Sheet for specific information on the safe handling of this product.
Packaging
Packaging: 10 kg (22 lb) resealable metal drums
Units Per Pallet: 60
