Parafor 30, Cold Adhesive, SFT Adhesive or Hot Asphalt Applied
Parafor 30 are the finish plies of the Siplast Paradiene 20/Parafor 30 Systems and are used as a base flashing where granule-surfaced flashing sheets are required. These high-performance, modified bitumen finish plies can be applied in approved Type IV asphalt, Siplast PA-311 Adhesive, or SFT Adhesive.
- Designed for use in homogeneous multi-layer modified bitumen roof membrane systems.
- Available in bright white color option.
- Available with Siplast RoofTag RFID.
Parafor 30
Consists of a fiberglass scrim/polyester mat composite impregnated and coated with high-quality SBS-modified bitumen, and surfaced with ceramic granules.
Parafor 30 BW
Consists of a fiberglass scrim/polyester mat composite impregnated and coated with high-quality SBS-modified bitumen, and surfaced with highly reflective, white mineral granules.
Environmental Impact
Value: Siplast Bright White cap plies are designed to reflect more sunlight and absorb less heat than a standard colored granule. Using the Energy Commission’s solar reflectance index calculator, Bright White granules achieve an initial SRI of 92.
Base Sheets
Extend the life of SBS Mod Bit with Paracoat
As roofing professionals, we're called to protect our client's budgets as well as their buildings. If your client has a watertight Siplast SBS-modified bitumen roof system or other approved roof membrane system, Siplast Paracoat can help extend its life, while protecting it from the effects of weathering. Siplast Paracoat is a high-performance, multi-component, fast-curing, and flexible PMMA roof coating resin.