texture of Terapro 250 when installed

2024

Quarter 1

Siplast Journal

Every step means education through installation

Check out Siplast hands-on installation training and on-demand webinars to ensure your specified system performs as expected. Read our quarter 1 newsletter, the Siplast Journal, and explore your continuing education options.
SBS mod bit flashing installation

Take your project over the finish line: Installation

You've done your part – specifying the right system. Now it's in the hands of the installers. And Siplast is still there, every step of the way, with hands-on installation training designed to help ensure the system you specified delivers the performance you expect.
Browse for installer's guides Browse Technical Guides

Let's meet in-person Find us at these events

Understanding the 4 control layers

While building enclosures primarily regulate the movement of water and heat, they also play a vital and complex role in the regulation of air and vapor. This article helps specifiers differentiate between vapor retarders and air barriers, and provides guidance on enclosure design incorporating the 4 control layers.
commercial building

4 controls layers include

  1. water control water control

    water
  2. thermal control thermal control

    heat
  3. air control air control

    air
  4. vapor control vapor control

    vapor
Read the article
Terapro 250 Resin/Aggregate being installed

Ready. Set. Park!

With Siplast Terapro, you can return a parking deck to service in as little as three hours after application, which is significantly faster than single and two component polyurethanes. Less disruption. Faster return to service.

See for yourself, watch the Terapro 250 application overview video below.

Browse products Download CPDS

Terapro 250 Application Overview

Review an overview of the Terapro 250 application process.
Wall Transition Essentials webinar

On-Demand Course: Wall Transition Essentials - Where Continuity Meets Vulnerability

Earn 1 AIA LU/HSW, IIBEC CEH, 0.1 IACET CEU

This session explores the impacts of whole building performance as well as design, material & assembly, installation verification, and wind resistance requirements at the critical wall-to-roof interface. Presenters Herman Lopez and Benjamin Meyer, AIA, LEED AP will review design examples and strategies for navigating competing interests through design, specification, and construction sequencing.

Register Browse for more webinars